Jetting for KTM 2T Moto for Pc

1. Also this tab allows to use the GPS to get the current position and altitude, and connect to an external service (you can choose one weather data source from several possible) to get the weather conditions of the nearest weather station (temperature, pressure and humidity).

2. This app is using temperature, altitude, humidity, atmospheric pressure and your engine configuration for calculate optimal jetting (carburetor configuration) and spark plug to use for KTM 2-strokes MX, Enduro and Freeride bikes (SX, SXS, XC, XC-W, EXC, MXC, R models).

3. This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weather station thought internet.

4. Besides this jetting information, the air density, density altitude, relative air density, SAE - dyno correction factor, station pressure, SAE- relative horsepower, volumetric content of oxygen, oxygen pressure are shown too.

5. These data are calculated depending on the weather conditions and the engine configuration given in the next tabs.

6. • Weather: In this tab, you can set the values for current temperature, pressure, altitude and humidity.

7. • Engine: You can configure in this screen the information about the engine, that is, engine model, year, spark manufacturer, fuel type, oil mix ratio.

8. • Results: In this tab main jet, needle type, needle position, pilot jet, air screw position, throttle valve, spark plug are shown.

9. Application can run without GPS, WiFi and internet, in this case user has to give the weather data manually.

10. In addition, this application can work with a pressure sensor built into the iPhone.

11. If more accuracy is needed, a portable weather station can also be used.

12. Liked Jetting? here are 5 Sports apps like Jetting for KTM 2T Dirt Bikes; Jetting for Husqvarna 2T Moto; Jetting for TM Racing 2T Moto; Jetting IAME KZ1 / KZ2 Kart;